|
 |
Phoenix
- MD Series
Construction. The
MD series is a full size machine designed for high sample out put. The
Phoenix uses a modular system of construction so that whether your
analysis program calls for 60,000 or 1000 samples per annum there is a
Phoenix model whose design has been optimized to do just that.
Operation. Samples are dissolved and mixed into a lithium borate
flux at temperatures ranging from 300 to 1600 degrees Celsius. (Typical
fusion temperature is 1050 degrees Celsius) This is done over
oxygen-enriched flames using specially designed burners. The Mouldable
machine uses a mould which incorporates a crucible shape. The mixing and
moulding is done in the mouldable. When mixing is complete the molten
material is cooled in the mouldable. The bead is then removed using a
suction cup or similar.
FEATURES:
 | INDIVIDUAL BURNER SELECTION |
| VARIABLE SPEED SWIRL ACTION |
| FULLY REGULATED AIR COOLING (2
STAGE) |
| RESET AT ANY TIME |
| CAN BE USED AT HIGH ALTITUDE
WITHOUT MODIFICATION |
| SEPARATE MOULD HEATING AND TIMING |
| CAN HEAT MOULDS UP TO 180GM |
| AUTO-LOCK CRUCIBLE HOLDERS |
| ADJUSTABLE POUR & MOULD DELAY |
| INDIVIDUAL BURNER MANIFOLDS
|
DESCRIPTION No of BURNERS No of SAMPLES PRODUCED
| PHOENIX 2000/MD 2 BURNERS 2 BEADS
|
| PHOENIX 4000/MD 4 BURNERS 4 BEADS
|
| PHOENIX 6000/MD 6 BURNERS 6 BEADS
|
| PHOENIX 8000/MD 8 BURNERS 8 BEADS |
| PHOENIX 10000/MD 10 BURNERS 10
BEADS |
APPLICATIONS
Glass and ceramics industry. Bauxite/Alumina. Mineral sands industry.
slag's, mattes sinters etc.
The steel industry, analysing iron ores, blast furnace slags and even
magnesites.
. Base metal (Pb, Zn, Cu, Ni) for the analysis of sulphides
concentrates, Silicate University's and research organisation. The
cement industry, analysing sand, limestone, kiln feed, clinker, milled
meal etc..
AFT machines have also been used to successfully fuse Ferro alloy
powders. |
