Phoenix R


Spectrum Plus® Analytical Instrumentation Service 1985-2005

Phoenix R Series

The "R" Series is a smaller unit suitable for low sample output. All safety and quality features of it's big brothers are part of the design.
Frame size 620mm wide x 450mm deep x 250mm high

Standard Features on the Phoenix R Models

	Individual Burner Selection
	Separate Mold Heating
	Variable Speed Swirl Action
	2-Stage Regulated Air Cooling
	Individual Burner Manifolds
	Reset At Any Time
	Can Be Used at High Altitude without Modification

Construction The R series is a smaller than the M series and is designed for lower sample out put. The Phoenix R series also uses a modular system of construction so that analysis can be optimized from a single sample model up to a 3-position machine.

	PHOENIX 1000/R (UPGRADEABLE TO 3000) Produces 1 samples
	PHOENIX 2000/R (UPGRADABLE TO 3000) Produces 2 samples simultaneously
	PHOENIX 3000/R Produces 3 samples simultaneously

Options on R Models

Pre-Melt

Oxygen Injection

Operation. Samples are dissolved and mixed into a lithium borate flux at temperatures ranging from 300 to 1600 degrees Celsius. (Typical fusion temperature is 1050 degrees Celsius) This is done over oxygen-enriched flames using specially designed burners. The sample is automatically poured into pre-heated moulds and cooled in-situ.